Software Version; Auto Scan Modes; Secondary Services; Manual Tuning - Sandstrom S66IDAB10E Instruction Manual

Software Version

Press and hold the INFO button for 2 seconds and then release it to view the software
1.
version of this unit.
2. The software version will automatically disappear after 5 seconds.

Auto Scan Modes

There are two types of scans, one is Quick scan and the other is Full scan.
• Quick scan:
Searches the stations between channels 8A and 13B.
To activate the quick scan press the SCAN button.
• Full scan:
Searches all DAB channels in the DAB Band III.
Press and hold the SCAN button for 2 seconds.

Secondary Services

You may see a ">" symbol after the name of the station, this indicates that there are secondary
services available to that station. These secondary services contain extra services that are
related to the primary station. e.g. a sports station may want to add extra commentaries. The
secondary services are inserted directly after the primary station in the station list.
To select the secondary station, press the
the station name. When the secondary service ends, the radio will automatically switch back to
the primary station.

Manual Tuning

As well as the auto tune function, you can manually tune the receiver. This can help you when
aligning your aerial or when adding stations that were missed while auto tuning.
Press and hold the ENTER button, the display will now show Manual tune.
1.
2. Press the buttons to cycle through the DAB channels, which are numbered from 5A
to 13F.
After your desired channel number is selected, press the ENTER button to enter the
3.
current multiplex, the top line will now display the first station in the multiplex.
4. Press the buttons to see what stations are present in the found multiplex.
5. Once you have reached the last station in the found multiplex, it will revert back to the
first station again. If you wish to exit the Manual Tuning mode, just press the ENTER
button.
button when the ">" appears in the display before
GB
17