I/O Settings; How To Edit And Change Parameter Settings Related To I/O Terminals - ABB ACS850 User Manual

42

I/O Settings

In the I/O Settings mode, you can:
• check the parameter settings related to any I/O terminal
• edit the parameter setting
• start, stop, change the direction and switch between local and remote control.

How to edit and change parameter settings related to I/O terminals

Step Action
1. Go to the Main menu by pressing
EXIT
by pressing
2. Go the I/O Settings mode by selecting I/O SETTINGS on the menu with keys
and
Select the I/O group, e.g. Digital inputs, with keys
SEL
3. Press . After a brief pause, the display shows the current settings for the
selection.
You can scroll digital inputs and parameters with keys
INFO
4. Press . The panel shows information related to I/O selected (in this case,
DI1).
You can scroll information with keys
EXIT
Press to return to the digital inputs.
5. Select the setting (line with a parameter number) with keys
You can edit the parameter (INFO selection turns into EDIT selection).
EDIT
6. Press .
Operation
MENU
if you are in the Output mode, otherwise
repeatedly until you get to the Main menu.
ENTER
, and pressing .
and .
and
and .
and
Display
LOC MAIN MENU
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT 00:00
LOC I/O SETTINGS
Analog outputs
Analog inputs
Digital I/Os
Digital inputs
Relay outputs
EXIT 00:00
LOC
I/O SETTINGS
Analog outputs
Analog inputs
Digital I/Os
Digital inputs
Relay outputs
EXIT 00:00
LOC I/O SETTINGS
DI1
1002 Ext1 start in1
DI2
.
DI3
1010 Fault reset sel
EXIT 00:00
LOC I/O INFO
NUM OF I/O ITEMS
0
SLOT NUMBER
0
NODE NUMBER
EXIT 00:00
.
LOC I/O SETTINGS
DI1
1002 Ext1 start in1
DI2
DI3
1010 Fault reset sel
EXIT 00:00
LOC PAR EDIT
1002 Ext1 start in1
DI1
[P.02.01.00]
CANCEL 00:00
1
ENTER
1
SEL
4
SEL
1
INFO
1
EDIT
SEL