AJAX vhfBridge User Manual page 16

1. Go to the Devices
2. Find vhfBridge in the list of devices.
3. Go to the Outputs menu.
4. Find the output in the list and go to its Settings by clicking on the gear icon
.
5. Set the required parameters.
6. Click Back to save the new settings.
Setting
Event type
Connection type of the output
Event types of vhfBridge outputs
Event type
Not assigned
Intrusion alarm
tab.
Selection of the event type to which vhfBridge
output reacts.
A complete list of event types and their icons is
available below
Selection of the output type:
Description
Output disabled
The alarm of opening,
movement, and breaking of
detectors
Meaning
High potential output (positive trip).
Low potential output (negative trip).
Icon