NF8480M5
Operation and
Maintenance Guide
Figure 9- 3
8.4
CPU maintenance
Maintenance steps:
Step 1: Match the Clip triangle logo with the corner logo on the CPU, and then assemble
the Clip with the CPU.
Step 2: The position of "1" on the heat sink label corresponds to the triangle mark on the
Clip, and then the locating hole on the heat sink module corresponds to the Clip vertically
and is pressed and assembled together.
Step 3: vertically mount the assembled heat dissipation module on the CPU base, andthe
position of numeral 1 on the label of the heat dissipation module corresponds to the
triangular mark on the CPU base of the mainboard; Then lock the screws in the orderof
1, 2, 3 and 4 listed on the label.
8.5
Memory maintenance
The same machine can only use the same type of memory. Specific memory installation
and combination principles are as follows:
28
Inspur proprietary and confidential information
Copyright Inspur Electronic Information Industry Co., Ltd.