Environmental Inspection Of Computer Room; Cable Layout Inspection - Inspur NF8480M5 Operation And Maintenance Manual

This identification is a grounding identification outside the equipment.
The two ends of the grounding cable are respectively connected to
different equipment, indicating that the equipment must be grounded
through the grounding point to ensure the normal operation of the
equipment and the personal safety of the operators.
This mark is the grounding mark inside the equipment. Both ends of the
grounding cable are connected to different components on the same
equipment, indicating that the equipment must be grounded through the
grounding point to ensure the normal operation of the equipment and
the personal safety of the operators.
This sign indicates an electrostatic sensitive area. Do not touch the
equipment with your bare hands. When operating in this area, please
take strict anti-static measures, such as wearing anti-static wrist bands
or anti-static gloves.

6.1.2 Environmental Inspection of Computer Room

The computer room environment mainly includes air conditioning and power supply
equipment inside the computer room.
For cable inspection, visual inspection is recommended. Reseat if necessary.
In order to prevent cable damage before inspecting cable layout, the following matters
should be paid attention to:
1、 Check the power cord
Ensure that the joint surface of the three-wire power supply grounding wire is good.
Make sure the power cord is of the correct type.
Make sure that the insulation on the surface of the power cord is not damaged.
2 、 Ensure that cables are far away from heat sources, cables are not tight and are kept
moderately loose.
3、 Do not use too much force when plugging or unplugging cables.
4、 Plug and unplug cables through the connection ports as much as possible.
5、 Under no circumstances should cables be twisted or pulled.
6、 Proper wiring ensures that the parts to be removed or replaced will not touch the
Inspur proprietary and confidential information
Copyright Inspur Electronic Information Industry Co., Ltd.
NF8480M5
Operation and
Maintenance Guide

6.1.3 Cable layout inspection

18