Ip Filtering - Planet VR-300 Series User Manual

4.6.3 IP Filtering

IP Filtering is used to deny LAN users from accessing the public IP address on internet as shown in
Figure 4-40. To begin blocking access to an IP address, enable IP Filtering and enter the IP address of
the web site you wish to block.
Object
IP Filtering
Add IP Filtering Rule
Object
Enable
Source IP Address
Anywhere (of source IP
Address)
Enterprise 5-Port 10/100/1000T VPN Security Router
Figure 4-40: IP Filtering
Set the function as enable or disable.
Go to the Add Filtering Rule page to add a new rule.
Figure 4-41: IP Filter Rule Setting
Set the rule as enable or disable.
Input the IP address of LAN user (such as PC or laptop) which you
want to control.
Check the box if you want to control all LAN users.
- 93 -
Description
Description
VR-300 series