Ip Filtering - Planet Enterprise WiFi System User Manual

9.2 IP Filtering

Use the IP Filtering to restrict particular LAN IP addresses from accessing the Internet.
You can assign the specific IP address and choose Protocol to configure.
Parameter
Enable IP Filtering
Local IP Address
Protocol
Comment
Apply Changes
Reset
Delete Selected
Delete All
Reset
Description
Click to enable the IP filtering security function.
To restrict data transmission from local network on certain
IP addresses, fill in the IP address and the protocol, also
put your comments on it.
The Protocol can be TCP, UDP or Both.
Comments let you know about whys to restrict data from
the IP address.
Click the Apply Changes button to register the IP address
to IP filtering list.
Click the Reset button to abort change and recover the
previous configuration setting.
Click to delete the selected IP address that will be removed
from the IP-filtering list.
Click to delete all the registered entries from the IP-filtering
list.
Click the Reset button to abort change and recover the
previous configuration setting.
48