Reset Led (Led1); Power Led (Led2); Status Led (Zled1) - Analog Devices ADSP-BF706 EZ-KIT Mini Manual

Reset LED (LED1)

When is
LED1 ON
LED is controlled by the Analog Devices ADM6384 supervisory reset cir-
cuit. A master reset is asserted by pressing
more information, see

Power LED (LED2)

When is
LED2 ON
domain.
3V_SLEEP
ing modes.

Status LED (ZLED1)

Status LED (
ZLED1
• Green – Signifies the debug agent is powered, configured, and
ready to invoke a CCES session.
• Magenta – Signifies the ICE is operating in JTAG mode. The LED
blinks during USB activity between the host PC and the emulator.
• Cyan – Signifies the ICE is operating in SWD mode. The LED
blinks during USB activity between the host PC and the emulator.
ADSP-BF706 EZ-KIT Mini Evaluation System Manual
ADSP-BF706 EZ-KIT Mini Hardware Reference
(red), it indicates that the master reset is active. The reset
Reset Push Button
(green), it indicates that power is supplied to the
domain can be turned off for USB power-sav-
3V_SLEEP
) provides the status of the debug agent.
which activates
SW1
(SW1).
. For
LED1
2-7