Table of Contents
Advertisement
1.2
Copyright
The copyright to these operating instructions is held by Siemens AG.
These operating instructions must not be wholly or partly reproduced for competitive
purposes, used in any unauthorized way or made available to third parties without
agreement of Siemens AG.
1.3
Intended use
The MOTOX worm gearboxes described in these operating instructions have been designed
for stationary use in general machine engineering applications.
Unless otherwise agreed, the gearboxes have been designed for use in machinery and
plants in industrial environments.
The gearboxes have been built using state-of-the-art technology and are shipped in an
operationally reliable condition. Changes made by users could affect this operational
reliability and are forbidden.
Note
The performance data assumes an ambient temperature of -20 °C to +40 °C and an
installation altitude of up to 5 000 m above sea level.
In the case of other ambient temperatures and installation altitudes, please contact Technical
Support.
The gearboxes are designed only for the area of application described in Section Technical
data (Page 43).
Do not operate the gearboxes outside the specified performance limits.
Any different operating conditions require new contractual agreements.
Do not climb on the gearbox. Do not place any objects on the gearbox.
BA 2012
Operating Instructions, 03/2013, 70000004024300
ATEX version gearboxes
The ATEX gearbox meets the requirements of the Explosion Protection
Directive 94/9/EC.
In the case of ATEX version gearboxes, please observe instructions marked with
this symbol.
General information and safety notes
1.2 Copyright
7
Advertisement
Table of Contents
