Kongsberg Simrad TV80 Reference Manual page 194

Simrad TV80 Reference Manual
Description
•
TrawlEye Mode
Depending on your operational needs or on the
properties of your PX TrawlEye, you can choose
how to see your echogram. If the PX TrawlEye
is equipped with a Depth Lid and the depth
measurement is enabled, you can also select to view
the PX TrawlEye echogram in true motion.
TrawlEye Mode function, page 251
•
Sensor
You can use two or more PX TrawlEye sensors
simultaneously. If you have more than one PX
TrawlEye sensors connected to your system, this
is the place to select and identify the one you want
to see.
Sensor function, page 251
•
Range
The parameter defines how "far" you want the TrawlEye to detect echoes. A
Range
better resolution is achieved using the shorter ranges.
Range function, page 252
•
Start Range
If you do not want to see the echogram from 0 meters, you can establish an offset in
the echogram in the
Start Range function, page 252
• When you configure a PX TrawlEye sensor, you can select key parameters
Gain
related to its echo sounder, check its battery status or even configure some special
features like the learn mode.
Gain function, page 253
•
Horizontal Axis
The echoes travels from right towards left across the echogram presentation.On the
function you can choose the horizontal scale of the PX TrawlEye
Horizontal Axis
echogram. This controls the "speed" of the echoes.
192
function.
Start Range
406388/F