Table of Contents
Advertisement
What do I want to do?
Set air flow
Adjust the air distribution
Depending on various factors like interior tempera-
ture, sunlight or air quality, the air conditioning sys-
tem adjusts the air distribution and air flow fully
automatically in automatic mode.
Automatic mode is deactivated as soon as the set-
tings for the relevant function selected are adjusted
manually.
The air conditioning system can be operated both
using the buttons in the center console and in the
rear, as well as using the touch display in the
dashboard.
The air conditioning system operates most effec-
tively with the windows closed.
If heat builds up in the vehicle interior:
e briefly air the interior by opening the windows.
Depending on the outside temperature and humid-
ity, condensation may drip from under the vehicle.
This is quite normal and is not a defect.
If the battery voltage is too low, the air conditioning
functions are initially restricted and then switched
off.
2-zone air conditioning
The temperature, air flow, air distribution and type of
air conditioning can be set individually for the left
and right air-conditioned areas.
What do I have to do?
Press button B for the left side or button F for the right side.
Air at head level for left or right side: Press button
Air to central and side vents for left or right side: Press button
Air to footwell for left or right side: Press button
4-zone air conditioning
Temperature, air flow, air distribution and type of air
conditioning control can be set individually for the
front left, front right, rear left and rear right air-
conditioned areas.
Switching air conditioning on and
off
Switching air conditioning on and off in the
entire vehicle
Touch display in dashboard:
e CLIMATE
e AIR
e OFF
Reducing the air flow to the rear air-conditioned
areas or switching the rear air conditioning system
off does not improve passenger comfort in the front
air-conditioned areas.
Switching on automatic mode
The front and rear air-conditioned areas can be
switched to automatic mode independently of one
another.
e Press button
for the relevant air-
conditioned area on the front or rear air-condi-
tioning control panel.
Air Conditioning (2/4-Zone Air Conditioning)
.
.
.
The light indicator on button
up. Air flow and distribution are automatically
controlled.
If necessary, the automatic system can be controlled
manually. The manual setting is retained until the
appropriate function button is pressed again or until
button
is pressed.
Switching the cooling function on
and off
The cooling function cools and dries the air.
In automatic mode, the cooling function is activated
by default. The cooling output is automatically
controlled.
e CLIMATE
e AIR
The cooling function is switched off or on.
Switching maximum cooling out-
put on and off – A/C MAX mode
In A/C MAX mode, the vehicle interior is cooled at
maximum power.
A
Where?
B
> p. 62
C
> p. 63
D
E
F
G
lights
H
I
J
K
L
M
N
O
P
Q
e A/C
R
S
T
U
V
W
X
Y
Z
61
Advertisement
Table of Contents
