Table of Contents
Advertisement
Porsche Communication Management (PCM)
G – Options and short options (most impor-
A
tant settings) for each menu item
B
H – Connection and status symbols
C
e.g, display of different functions and temperature or
D
time display. Tap to open the quick selection.
E
I – Info widget
F
When
is opened, the factory set and individually
G
set functions are displayed. Swipe vertically to
H
change Info widget.
Content from different categories can be individually
I
grouped in tiles. A tile contains either a direct jump
to the relevant menu or direct access to a function.
J
A total of three different layouts can be configured.
K
Important information on
L
operation
M
The Porsche Communication Management (PCM) is
N
the central control unit. To preserve the vehicle bat-
O
tery, the PCM switches off automatically a few mi-
nutes after the ignition is switched off.
P
For safety reasons, some functions are only available
Q
when the vehicle is stationary.
R
WARNING
S
Configuring settings and operating the multifunction
T
steering wheel, infotainment system, etc. while
U
driving can distract you from the traffic. You may
lose control of the vehicle.
V
e Only operate these components while driving if
W
the traffic situation allows.
e If in doubt, stop in a safe place and only carry out
X
extensive operations and settings while the ve-
Y
hicle is at a standstill.
Z
218
Operating the touch display
Fig. 148: Operating the touch display
A – Tap (select)
Briefly tap the touch display with your finger. Exam-
ple: Select function or activate/deactivate checkbox.
B – Long press
Press the touch display with your finger for longer.
Example: Save station as a favorite in the Media
main menu.
C – Horizontal swipe
Swipe the touch display horizontally with your finger.
Example: Scroll favorites horizontally.
Configuring settings and
operating while driving
D – Vertical swipe (scroll and switch)
Swipe the touch display vertically with your finger.
Example: Search through lists manually or switch the
Info widget.
E – Vertical swipe (scroll)
Swipe the touch display vertically using two fingers
to tilt the map in the Navigation main menu.
F – Zoom
Move two fingers further apart or closer together.
Tap the touch display twice to zoom in on a section.
Operating the rotary push button
Fig. 149: Operating the rotary push button
1. Turn the rotary push button until the desired
function is highlighted.
2. Press the rotary push button to activate the
highlighted function.
Opening menus
Open the main menu
e Press the button in the center console (e.g.
) or in the touch display (e.g. NAV
Calling up submenu
e Select menu item (e.g. MAP
display.
Opening settings for each menu item
b b Desired menu is selected.
e Select options
.
).
) in the touch
Advertisement
Table of Contents
