Table of Contents
Advertisement
The process stops when the button is released.
Stage two – automatic operation
e Press or pull the switch all the way to the second
setting in the relevant direction.
The roof system opens as far as the best end
position from the point of view of noise or closes
automatically.
e Actuate the switch again to stop the roof system
at the desired position.
Opening roof system completely
In one-touch mode, the roof system opens as far as
the best end position from the point of view of noise
(comfort position). To open the roof system
completely:
e Actuate the switch again in the opening
direction.
The roof system opens to the final position.
e Wind noises are possible, depending on the
driving speed.
Closing after repeated intervention from the
force limiter
If the closing operation is impeded by an obstruction,
the roof system can be closed with increased force.
1. Remove the obstruction.
2. Repeatedly press or press and hold the switch in
the closing direction until the roof system stops
in the closed position.
Opening and closing sunblind
Fig. 167: Opening and closing sunblind
The switch has a two-stage function. When the
switch is actuated, both stages can be clearly felt
due to a resistance when pushed or pulled.
Stage one – manual operation
e Press or pull the switch in the first setting until
the required position is reached.
The process stops when the switch is released.
Stage two – automatic operation
e Briefly pull or press the switch fully to the second
setting.
The sunblind opens or closes automatically to
the final position.
e Actuate the switch again to stop the sunblind at
the desired position.
Closing roof system and sunblind
– If the sunblind is closed (one-touch operation)
while closing the roof system, the sunblind
closes to its final position after the roof system
has reached its final position.
– If the roof system is closed (one-touch opera-
tion) while closing the sunblind, the closing
movement of the sunblind will be interrupted.
The sunblind closes to its final position after the
roof system has reached its final position.
Storing final positions of roof sys-
tem and sunblind
Anti-pinch protection
WARNING
deactivated
The roof system and sunblind close with their full
closing force. Parts of the body that become trapped
between the moving and stationary vehicle parts
may be crushed.
e Make sure that no parts of the body become
trapped between moving and stationary vehicle
parts when closing.
Storing final position of roof system
b b Vehicle is stationary.
b b Ignition is switched on.
b b Roof system closed
e Pull the switch (Fig. 166) on the overhead con-
sole downward and hold.
Saving of the final position starts after approx.
10 seconds.
The closing and storing process takes a maxi-
mum of 45 seconds.
Storing final position of sunblind
b b Vehicle is stationary.
b b Ignition is switched on.
b b Sunblind is closed.
e Press and hold switch (Fig. 167).
Saving of the final position starts after approx.
10 seconds.
The closing and storing process takes a maxi-
mum of 45 seconds.
Roof system
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
239
Advertisement
Table of Contents
