Table of Contents
Advertisement
headline (depending on the connection status) to
make the PCM visible.
2. Select the PCM from the list of available devices.
The Bluetooth
device name of the PCM can be
®
displayed in the Device manager under Options
e Bluetooth e Bluetooth name.
Connecting to a known cellphone
b b The Bluetooth
function of the cellphone is
®
activated.
b b The PCM Bluetooth
function is activated.
®
> Please see chapter "Device Manager" on
page 106.
1. Select
or
in the header (depending on
the connection status).
A list with a maximum of 20 known cellphones
is displayed.
2. Select a cellphone from the list.
The cellphone is connected via Bluetooth
Connecting and using a second cellphone
b b A cellphone is already connected to the PCM.
1. Select
or
in the header (depending on
the connection status).
2. Select a cellphone from the list or connect a
new cellphone.
> Please see chapter "Connecting a new cell-
phone" on page 178.
Both connected cellphones can receive calls,
but only the active cellphone can make calls.
3. Select the currently connected device at the
top right in the headline in order to switch be-
tween the two connected cellphones.
The two devices already connected are
displayed.
– or –
e Options
PHONE
Select the desired device.
Using the PCM with a SIM card
The SIM card can only be used for data connection.
For information about the data connection:
> Please see chapter "Porsche Connect" on
page 223.
Inserting and removing a SIM card
NOTICE
If you are using a SIM card adapter, the SIM card
may fall out of the adapter due to vibrations and
components of the card may get stuck in the drive.
e Do not use a SIM card adapter.
.
®
Fig. 122: SIM card in glove compartment
1. Insert SIM card B (mini-SIM, dimensions: 0.98 x
0.59 in. (25 x 15 mm)). The missing corner
must be pointing front left with the chip facing
down.
2. SIM card with PIN:
a. Enter the PIN code of the SIM card and
confirm with OK.
b. Select Store PIN.
e Select a phone e
3. To remove the SIM card, press on the inserted
card and remove it.
Displaying connection status
Depending on the model, country and equipment,
the following displays are possible in the header:
Storing and editing a favorite
Storing a favorite
1. PHONE
2. Select the contact from the Last contacted
area and move it to the Favorites area via drag
& drop.
Mobile Phone
No phone connected.
No data connection available (possible
causes: no connection, poor network
quality, interruption of the data connec-
tion during a voice connection).
Data connection via the LTE cellphone
network.
Data connection via the UMTS/HSPA
cellphone network (3G).
Data connection via the EDGE cellphone
network (GSM).
Reception field strength of the cellphone
network for the phone function.
Data connection via external WiFi
hotspot.
e FAV
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
179
Advertisement
Table of Contents
