Using The Group Function; What Is The Group Function; Using The Group Function When Recording; Recording Tracks To A New Group - Sony MZ-N10 Operating Instructions Manual

Using the group function

What is the group
function?
The group function is provided to allow
playback of discs with group settings. The
group function is convenient for playback
of MDs on which several albums or CD
singles have been recorded in MDLP
(LP2/LP4) mode.
What is a disc with group
settings?
The recorder can operate various
functions in units of group; that is tracks
that have been recorded on a disc as part
of separate groups, as shown below.
Before group settings are made
Disc
1 2 3 4 5 6 7 8
Track 1 to 5 are assigned to group 1.
Track 8 to12 are assigned to group 2.
m
Track 13 to15 are assigned to group 3.
Track 6 to 7 are assigned to no group.
After group assignments have been made
Disc
Group 1
1 2 3 4 5 6 7 1 2 3 4 5
Tracks that were not assigned to a group
are treated as being part of "Group - -".
You can create a maximum of 99 groups
on a disc.
50
12131415
Group 3
Group 2
1 2 3
Note
It will not be possible to make a group setting if
the tracks, groups and disc name on a disc
exceed the maximum number that can be input.
Using the group
function when
recording
GROUP
zREC
Recording tracks to a new
group
During recording, you can add a new
group at the end of the currently recorded
tracks on a disc.
1
While the recorder is stopped, press
END SEARCH.
2
While pressing GROUP, press and
slide zREC.
3
Play the source sound.
A new group will be added after the
current contents on a disc.
To stop recording
Press x.
The material that was recorded up until x
was pressed is entered as a new group.
5-way control key
(., >)
END SEARCH