Turning On/Off The Backlight; Adjusting The Contrast Of The Display Window; (Contrast Adjustment); Labeling (Name) - Sony MZ-N10 Operating Instructions Manual

Turning on/off the backlight

The backlight of the display window of
the remote control can be set to remain on
or off.
This function can be set with the remote
control only.
1
While the recorder is stopped, enter
the menu and select "OPTION" -
"BACKLIGHT".
2
Select the desired item.
Display Setting
AUTO The backlight lights when
you operate the recorder or
the remote control, and
automatically turns off when
no operation is made for a
few seconds.
ON The backlight lights when
the recorder is operating.
OFF The backlight stays off.
Adjusting the contrast of the
display window

(Contrast Adjustment)

You can adjust the contrast of the display
window on the recorder.
This function can be set with the recorder
only.
1
While the recorder is stopped, enter
the menu and select "OPTION" -
"CONTRAST".
2
Turn the jog dial to adjust the
contrast, and then press the jog dial to
enter the selection.
Note
You cannot adjust the contrast with the remote
control, nor can you adjust the contrast of the
display on the remote control.

Labeling (Name)

1
Enter the menu and select "EDIT" -
"Name".
2
Select one of the following.
When labeling a
track
When labeling a
disc
3
Turn the volume control repeatedly to
select a letter and press the jog lever
to enter.
The selected letter stops flashing and
the cursor moves to the next input
position.
The cursor flashes at the next input position.
The buttons and control used for
character input and their functions are
listed below.
Functions
To move the cursor to
the left or right.
To change the letter to
the one before/next
one.
To enter a letter.
To enter a name.
To switch between
capital letters, small
letters, and numbers/
marks.
To insert a blank space. Press
To delete a letter.
To cancel labeling.
" : Name"
" : Name"
Operation
Slide the jog lever
(., >)
Turn the volume
control (VOL+, –).
Press the jog lever
(NX/ENT).
Press the jog lever
for 2 seconds or
more (NX/ENT).
Press P MODE/ .
+.
Press –.
Press x for 2
seconds or more.
continued
69