Changing Playback Speed (Digital Pitch Control) - Sony MZ-N10 Operating Instructions Manual

To modify and store the sound
You can modify the sound and store the
results in "CUSTOM1" and
"CUSTOM2".
1 Do steps 1 to 3 of "Selecting the sound
quality (6-Band Equalizer)" (page 38), and
slide the jog lever until "CUSTOM1" or
"CUSTOM1" appears.
2 Press the jog lever.
3 Slide the jog lever repeatedly to select the
frequency.
Frequency (100 Hz)
From the left, you can select 100 Hz,
250 Hz, 630 Hz, 1.6kHz, 4 kHz, or 10 kHz
4 Turn the volume control repeatedly to adjust
the level.
Level (+10 dB)
You can select from among seven levels.
–10 dB, –6 dB, –3 dB, 0 dB, +3 dB, +6 dB,
+10 dB
5 Repeat steps 3 and 4 to adjust the level for
each frequency.
6 Press the jog lever to enter the selection.
To cancel the procedure
Press x for 2 seconds or more.
To return to the preceding
setting
Press x.
For the recorder operation, see
page 66.
Changing playback
speed (Digital Pitch
Control)
The speed control function is useful for
language study and other purpose. This
function changes the playback speed
without changing the playback pitch.
The playback speed can be varied from
+100% to –50% the normal speed, in 13
steps.
Jog lever
(., >, ENT)
1
While playing, press DISPLAY for 2
seconds or more.
2
Slide the jog lever repeatedly until
"USEFUL" appears in the display,
and then press the jog lever.
3
Slide the jog lever repeatedly until
"DPC" appears in the display, and
then press the jog lever.
The player changes to speed-setting
mode. Select the speed while
listening the sound.
4
Slide the jog lever repeatedly to select
the desired playback speed, and then
press the jog lever to enter the
selection.
"DPC" appears in the display.
To cancel the procedure
Press x for 2 seconds or more.
DISPLAY
39