Recording A Track To An Existing Group; Using The Group Function When Playing; Playing A Track In Group Play - Sony MZ-N10 Operating Instructions Manual

Recording a track to an
existing group
You can add a track to an existing group.
1
Press GROUP and press the control
key towards . or > until the
group you want to add a track to
appears in the display.
2
While pressing GROUP, press and
slide zREC.
3
Play the source sound.
z
• To add a track that is currently playing to a
group, stop or pause playing the track first,
and then do the procedure from step 2.
• You can set the recorder to always create a
new group without pressing the GROUP
button. See page 63 for details.
Using the group
function when playing
The recorder can operate various
playback with a disc which has group
setting.
This section explains the operations that
are done on the remote control. For details
on operations done on the recorder, see
page 65.
Jog lever
(., >, ENT)

Playing a track in group play

In group play, all groups are played in
order, starting with group 1, followed by
the unassigned tracks ("Group --").
Playback stops after all the tracks have
been played.
1
While playing, press P MODE/
until " " appears in the display.
To cue to the start of a group
(Group Skip)
1 While playing, press
Pressing the – button cues to the first
track in the current group. Pressing the button
again cues to the first track of the previous
group.
P MODE/
+, –
+ or –.
51