Recording Tracks Using The Group Function (Group Mode Recording) - Sony MZ-N707 OpenMG Jukebox NOTES on installing & operating Operating Instructions Manual

4
Press . or > repeatedly until
"Stamp OFF" flashes in the display,
and then press ENTER.
If you want "LP:" added, select "Stamp
ON" in this step, and then press ENTER.
Note
"LP:" is added to tracks checked-out in LP
stereo from your computer regardless of the
"LP Stamp" setting. If you want to delete
"LP:", do the procedure "Relabeling
recordings" (page 49)
z
• Audio components that support the LP2 stereo
or LP4 stereo modes are indicated by the
or logo marks.
• If you set the recorder so that "LP:" is not
added at the beginning of the track, you will
be able to enter longer track names by using
the full length of the text string (page 47).
• You can achieve high sound quality and rich
tones when recording in SP stereo (or
monaural) thanks to the newly developed DSP
TYPE-R for ATRAC (Adaptive TRansform
Acoustic Coding) (page 21).
Notes
• It is recommended that you use the AC power
adaptor for long recordings.
• If you try to play an MD recorded in LP2 or
LP4 on MD players or recorders that do not
support these modes, playback will not start
and "LP:" will appear on the display.
• Sound recorded through digital (optical) input
can be monitored in stereo through
headphones/earphones, etc.
• When you record in LP4 mode, momentary
noise may be produced on very rare occasions
with certain sound sources. This is because of
the special digital audio compression
technology that enables a recording time 4
times longer than normal. If noise is produced,
it is recommended that you record in normal
stereo or LP2 mode to obtain better sound
quality.
Recording tracks using
the group function
(Group Mode Recording)
What is the group function
(Group Mode)?
It is a function that allows you to separate
tracks on a disc into different groups for
playback, recording and editing.
When group mode is OFF.
Disc
Track number
1 2 3 4 5 6 7 8 9
When group mode is ON.
Disc
Group 1 Group 2
Track Track
number number
1 2 3 1 2
It is convenient for managing multiple CD
albums recorded in MDLP (LP2 stereo/
LP4 stereo) mode onto a single MD. You
can create a maximum of 99 groups on a
disc.
Group 3
Track
number
1 2 3 4
29
-GB