To Erase A Track; To Erase The Whole Disc - Sony MZ-N10 Operating Instructions Manual

x
Jog dial

To erase a track

Note that once a recording has
been erased, you cannot retrieve it.
Make sure of the track you are
erasing.
1
While playing the track you want to
erase, press the jog dial.
2
Turn the jog dial until "EDIT"
appears in the display, and then press
the jog dial.
3
Turn the jog dial until "Erase"
appears in the display, and then press
the jog dial.
4
Turn the jog dial until "
appears in the display, and then press
the jog dial.
"Erase OK?" and "PushENTER"
appear in the display.
5
Press the jog dial to erase the track.
The track is erased and the next track
starts to play. All the tracks after the
one erased are automatically
renumbered.
To erase a part of a track
Add track marks at the beginning and the
end of the part you want to erase, then
erase the part (page 47).

To erase the whole disc

You can quickly erase all the tracks and
data of the MD at the same time.
Note that once a recording has
been erased, you cannot retrieve it.
Be sure to check the contents of
the disc before you erase it.
1
2
3
4
5
6
: Erase"
7
To cancel erasing
Press x for 2 seconds or more.
To return the preceding
settings
Press x.
For the remote control operation, see
page 71.
Play the disc you want to erase to
check the contents.
Press x to stop.
Press the jog dial.
Turn the jog dial until "EDIT"
appears in the display, and then press
the jog dial.
Turn the jog dial until "Erase"
appears in the display, and then press
the jog dial.
Turn the jog dial until "
appears in the display, and then press
the jog dial.
"AllErase?" and "PushENTER"
appear in the display.
Press the jog dial to erase the whole
disc.
"TOC Edit" appears in the display,
and all the tracks will be erased.
When erasing is complete,
"BLANKDISC" flashes and "00:00"
appears in the display.
: Erase"
49