Erasing Tracks, The Entire Disc Or Groups (Erase); Assigning Tracks Or Groups As A New Group (Group Setting); Releasing A Group Setting - Sony MZ-N10 Operating Instructions Manual

Erasing tracks, the entire disc
or groups (Erase)
Erasing tracks
1
While playing the track you want to
erase, enter the menu and select
"EDIT" - "Erase" - "
"Erase OK?" and "PushENTER"
appear in the display.
2
Press the jog lever to erase a track.
To erase the whole disc
1
Play the disc you want to erase to
check the contents.
2
Press x to stop.
3
Enter the menu and select "EDIT" -
"Erase" - "
"AllErase?" and "PushENTER"
appear in the display.
4
Press the jog lever to erase the whole
disc.
For details and the recorder
operation, see page 48.
To erase a group
1
Select a group you want to erase and
check the contents (see "To cue to the
start of a group (Group Skip)"
(page 51)).
2
Press x to stop.
3
Enter the menu and select "EDIT" -
"Erase" - "
"GP Erase?" and "PushENTER"
appear in the display.
4
Press the jog lever to erase a group.
For details and the recorder
operation, see page 56.
: Erase".
: Erase".
: Erase".
Assigning tracks or groups as
a new group (Group Setting)
1
Enter the menu and select "EDIT" -
" : Set".
2
Slide the jog lever repeatedly until the
number of the desired first track
appears in the display, and then press
the jog lever.
3
Slide the jog lever repeatedly until the
number of the desired last track
appears in the display, and then press
the jog lever.
4
Label a group (see "Labeling
recorded groups" (page 70)).
For details and the recorder
operation, see page 53.

Releasing a group setting

1
Select a group that you want to
release and check the contents (see
"To cue to the start of a group (Group
Skip)" (page 51)).
2
Press x.
3
Enter the menu and select - "EDIT" -
" : Release".
"Release?" and "PushENTER"
appear in the display.
4
Press the jog lever to enter the
selection.
For details and the recorder
operation, see page 54.
71