Adding Track Marks While Recording; Adding Track Marks Manually; Adding Track Marks Automatically (Auto Time Mark) - Sony MZ-N10 Operating Instructions Manual

Adding track marks
while recording
You can add track marks (track number)
while recording to divide the material into
separate parts.
Jog dial
T MARK

Adding track marks manually

1
While the recorder is recording, press
T MARK (press P MODE/
remote control).
Adding track marks
automatically (Auto Time
Mark)
Use this feature to add track marks
automatically at specified intervals when
recording through the analog input
connector or a microphone. This function
is convenient for recording long period of
time, such as lectures, meetings, etc.
1
While the recorder is recording or in
recording pause, press the jog dial.
2
Turn the jog dial until "REC SET"
appears in the display, and then press
the jog dial.
3
Turn the jog dial until "TIME
MARK" appears in the display, and
then press the jog dial.
"OFF" flashes in the display.
4
Turn the jog dial until "ON" appears
in the display, and then press the jog
dial.
5
Turn the jog dial until the desired
time interval appears in the display,
and then press the jog dial to enter the
selection.
One rotation of the jog dial changes
the time setting (Time:) by 1 minute,
within the range of 1 to 99 minutes.
To cancel Auto Time Mark
Select "OFF" in step 4 or stop recording.
Using Auto Time Mark to add
track marks while recording
When the elapsed recording time
exceeds the time interval for Auto
Time Mark:
The recorder adds track marks at the point
on the
you set the time interval and from that
point the recorder adds a track mark
whenever the time interval has elapsed.
Example: Eight minutes of recording
has been completed when the Auto Time
Mark time interval is set to 5 minutes.
A track mark will be added at the 8-
minute point (after the start of recording)
and after each 5-minute interval
thereafter.
When the time interval set for Auto
Time Mark exceeds the elapsed
recording time:
The recorder adds track marks when the
set Auto Time Mark time interval has
elapsed.
Example: Three minutes of recording
has been completed when the Auto Time
Mark time interval is set to 5 minutes.
A track mark will be added at the 5-
minute point (after the start of recording)
and after each 5-minute interval
thereafter.
33