Connecting To A Stereo System (Line Out) - Sony MZ-N10 Operating Instructions Manual

Connecting to a stereo
system (LINE OUT)
You can listen to the playback sound from
connected component. Connect the i/
LINE OUT jack of the recorder to the
LINE IN jacks of an amplifier or a tape
player with a line cable.
Stereo system,
etc.
Stereo mini-plug
Line cable
To i/LINE OUT
Jog dial
When connecting a line cable to the i/
LINE OUT jack of the recorder, be sure to
set the "AUDIO OUT" parameter for the
i/LINE OUT jack.
1
Press the jog dial.
2
Turn the jog dial until "USEFUL"
appears in the display, and then press
the jog dial.
3
Turn the dial until "AUDIO OUT"
appears in the display, and then press
the jog dial.
42
To LINE IN
2 phono plugs
R
(red)
4
Turn the jog dial until "LINE OUT"
appears in the display, and then press
the jog dial to enter the selection.
Notes
• If the "AUDIO OUT" parameter for the
LINE OUT jack is set to "LINE OUT", VOL
+ or –, Virtual Surround, or 6-Band Equalizer
will not function.
• The "AUDIO OUT" parameter for the
LINE OUT jack cannot be set to "LINE OUT"
when the remote control is connected.
• When you connect the headphones/earphones
directly to the recorder, set the "AUDIO
OUT" parameter for the
"HeadPhone" in step 4.
L
(white)
i
/
i
/
i
/LINE OUT jack to