Using The Group Function; What Is The Group Function; Recording Tracks Using The Group Function; Recording A Track To A New Group - Sony Walkman MZ-NF610 Operating Instructions Manual

What is the group
function?
The group function is provided m allow
playback of discs with group settings. The
group function is convenient for playback
of MDs on which several albums or CD
singles have been recorded in MDLP
(LP2/LP4) mode.
What is a disc with group
settings?
Tbe rc¢ord¢r can operate va_ous
functions in units of group; that is tracks
fl_at have been recorded on a disc as a part
of separale groups, as shown below.
Before group settingsare made (normal
play)
__ Disc.
IT'll2131415161718 --
Track I to 5 are assignedto group 1.
Track8 to12 are assignedto group 2.
Track13 to15 are assignedto group 3.
Track6 to 7 are not assignedto a
group.
After settingthe group (groupplay)
Disc
Group I Group 2
IF'-
1
[
I r
]
Tracks that were not assignedto a group
are treated as being part of "Group - -".
You can creale a maximum of 99 groups
on a disc.
Note
It will no_ be possible to make a group setiing it"
the tr_cks, groups and disc name on a disc
exceed the maximum number tbal can be inpuk
Recording tracks using
the group function
END SEARCH
MENU i _ GROUP
4-way control key
Recording a track to a new
group
During recordia_g, you can _dd a new
group at the end of the currently recorded
tracks on a disc.
While the recorder is stopped, press
END SEARCH.
2 While pressing GROUP, press REC •
T MARK and liD'-.
Play the source sound.
A new groop will be added al_er the
current contents on a disc.
To stop recording
Press •.
The material that was recorded up until •
was pressed is entered as a new group.
46