Flashforge Adventurer 4 User Manual page 4

Cautions
Keep the inside of the device clean and tidy. Do not place metal objects into the
chute at the bottom of the platform.
Please clean up the remaining in time. It is recommended to operate outside the
equipment.
Any modifications to the device will invalidate the guarantee.
Lower the build plate before loading/unloading filament. The distance between
the nozzle and build plate should be kept for at least 50mm.
Operate the device in well-ventilated environment.
Never use the device for illegal activities.
Never use the device to make any food storage vessels.
Never put the prints into your mouth.
Environment Requirements
Temperature: RT 15-30℃; moisture: 20%-70%.
Place Requirements
The device must be placed in a dry and ventilated environment. The distance of
the left, right and back side space should be at least 20cm, and the distance of the
front side space should be at least 35cm. Device storage temperature: RT 0-40℃.
Filament Requirements
It's recommended to use the filaments offered by Flashforge, or from the brands
accepted by Flashforge. Due to the different properties of filaments, you need to
modify printing parameters when using those which are not offered by Flashforge.
Filament Storage
All polymers degrade with time. Do not unpack filament until necessary. Filament
should be stored in clean and dry conditions.
03