Flashforge Adventurer 4 User Manual page 26

Q19 . How to connect to Polar Cloud?
1. Open Polar Cloud website, and log in account. https://polar3d.com;
2. Click in Cloud Account on the right top corner, roll down the page to find PIN code;
3. Open Polar Cloud on the printer, enter account number and PIN code;
4. Turn on the switch and connect to Polar Cloud.
Q20 . How to connect to FlashCloud?
1. Open FlashCloud website: https://cloud.sz3dp.com/login.html;
2. Open FlashCloud interface or about on the printer;
3. Add the printer on FlashCloud website, enter name and registration code of
printer;
4. Turn on the FlashCloud switch to connect the printer.
Q21 . How to use camera?
1. Turn on camera to watch live video on the Cloud；
2. Time-lapse function will take 100 pictures during printing and makes a video.
Note
Pictures can contain up to 10 models, while videos 20 models.
Q22 . Operation of movement
1. When the length is not selected, press the button to start the movement, and
release the button to stop the movement;
2. When the length is selected, press to start the movement, release will not stop the
movement until the corresponding length is reached.
Pay attention to the distance when it moves along the side to avoid
Note
hitting the border.
Q23 . Noise in the gear when loading filaments?
The printer adopts fast-slow loading, make sure there is no remaining filament in the
guide tube.
Q24 . What is expert mode in calibration?
In expert mode, the distance can be adjusted directly for experienced users. Details
can be found in the calibration instructions for expert mode.
Q25 . How to set printing parameters during printing?
Set printing parameters in the printer. Note that adjustments might be delayed to
take effect, or improper adjustments will affect printing quality, please set it with
caution.
25