Flashforge Adventurer 4 User Manual page 24

Q6 . Can we use other brand filament which is not produced by Flashforge?
Adventurer 4 supports ABS, PLA, PC, PETG, PLA-CF, PETG-CF, etc., which have different
ingredients. Adventurer 4 tests out default settings like temperature and filament
output to ensure the best printing quality. Other brands of filaments can be used with
the parameters adjusted. Because the required temperature between different
materials is slightly different, it is recommended to clean the previous filaments
before using new filaments, otherwise it is easy to cause extruder blockage.
Q7 . Is Adventurer 4 compatible with all kinds of AC power input?
Adventurer 4 is equipped with a built-in 24V/13.3A power supplier, suitable for
100V-240V input voltage.
Q8 . Is Adventurer 4 capable of turning itself off automatically after printing job is
finished?
No .
Q9 . What kinds of file formats does Adventurer 4 support?
Input: 3MF/STL/OBJ/FPP/BMP/PNG/JPG/JPEG Files.
Output: GX/G files.
Q10 . Does Adventurer 4 support other cloud platforms besides FlashCloud?
Yes, Adventurer 4 interface is open up to all other cloud platforms.
Q11 . Is the ABS printing safe?
ABS filament will give off certain poisonous gas when heated up, please put the printer in
well-ventilated condition when printing ABS. We suggest using non-toxic PLA filament when
printer is near children.
Q12 . How to solve edge warping and weak adhesion?
Method1： Heating up the platform can increase adhesion between platform and
model.
Method2： Adding raft to model when slicing in FlashPrint.
Method3： Apply solid glue to platform before printing.
Method4： Use extruder calibration in expert mode or leveling calibration to reduce
the distance between the nozzle and the platform.
Method5： Make sure the platform is flat. Complete 9-point leveling suggested.
Method6： Apply extruder calibration to reduce the gap.
23