Maintain; Upgrade; Log; Calibration - Flashforge Adventurer 4 User Manual

Brightness: Adjust the screen brightness;
Light: turn on/off the light on the extruder;
FilamentDetect: filament check sensor is on/off;
Buzzer: Turn on/off the sounds of device startup and screen click;
PrinterName: User can name the device;
About: information of this device;
FactoryReset: this device is restored to factory setting.

2.4 Maintain

2.4.1 Upgrade

When the device is connected to the network, it will be prompted to upgrade when the
new firmware is released;

2.4.2 Log

When the equipment has abnormal movements, the problem can be fed back to the
official after-sales team of Flashforge by copying the log.
Camera: Remote monitoring. Turn
on the camera during printing, and
turn on time-lapse, and time-lapse
video can be recorded in the
memory disk; it can be found in
[Pictures]; choose [Take Pic], the
live scene is saved as images;
Maintain
Upgrade
Log

Calibration

ChangeExtruder

Maintain
13