Notice - Flashforge Adventurer 4 User Manual

Safety Notice: please read and strictly follow all the
safety warnings and notice below.
Note： Every printer has been tested before leaving factory. It is normal and will not
be of trouble if there are filament residue remaining in the extruder or slight
scratches on the plate.
Keep your work place tidy.
Do not operate Adventurer 4 in the presence of flammable liquids, gases or dust,
which will cause fire in the high temperature generated by the equipment.
Keep Adventurer 4 out of children and untrained people's reach.
Always use the Adventurer 4 with a properly grounded outlet. Do not refit
Adventurer 4 plug. Ungrounded / improperly grounded / refitted plugs will
increase the risk of leakage of electricity.
Do not use Adventurer 4 in damp environment or under the burning sun. Damp
environment will increase the risk of leakage / exposure to the sun will accelerate
the aging of plastic parts.
To avoid device damage, please use the power supply provided by Flashforge.
Avoid using the device during a thunderstorm.
In case of uncertain accident, please unplug the device if you do not use it for long.
Do not touch the nozzle and build plate during printing.
Do not touch the nozzle and plate after printing to avoid high temperature scald
or mechanical damage!
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and
gloves away from moving parts.
Do not operate the device while you are tired or under the influence of drugs,
alcohol or meditation.

Notice

Work Environment Safety
Electrical Safety
Personal Safety
02