Table of Contents
Advertisement
3.1 Description
The Ferno® Model 35-ITA Incubator Transporter (called the transporter
in this manual) is an emergency patient-handling device designed to
transport a patient in a ground-based ambulance.
The transporter is for professional use by a minimum of two trained
operators. It is designed for roll-in loading to help reduce the risk of
back injury to medical service personnel.
The transporter is designed for use with Ferno® fastening systems (not
included). It is compatible with the incubators listed on the product
information label affixed to the transporter. See "Safety and Instruction
Labels" on page 5.
A safety hook and users' manual are included with purchase.
3.2 General Specifications
Specifications for the transporter are shown in the tables at right.
General specifications are rounded. Metric conversions are calculated
before rounding the Imperial measurement.
Ferno reserves the right to change specifications without notice. For
more information, contact Ferno Customer Relations or your Ferno
distributor (page 2).
Weight is without the incubator or optional features.
Loading Height is the distance from the ground to the bottom of the
loading wheel.
Bed Position is the distance from the ground to the patient surface,
measured at the casting in the center of the patient surface.
8
Model 35-ITA Incubator Transporter
3 - ABOUT THE TRANSPORTER
WARNING
Improper use can cause injury. Use the transporter only
for the purpose described in this manual.
Specification
Load Capacity
Weight
Max. Load Height
Construction
Wheel Bearings
Dimension
Height
Position 8
Position 7
Position 6
Position 5
Position 4
Position 3
Position 2
Position 1
Width
Overall
Length
Maximum
Minimum
Wheels
© Ferno / 234-1929-06 / July 2021
Imperial
Metric
400 lb
181 kg
70 lb
32 kg
31 in
80 cm
Tubular aluminum
Sealed/greaseless
Imperial
Metric
40 in
100 cm
36 in
91 cm
32 in
81 cm
27 in
70 cm
23 in
59 cm
19 in
47 cm
14 in
35 cm
9 in
23 cm
23 in
58 cm
79 in
200 cm
63 in
160 cm
5 in
12.7 cm
Advertisement
Table of Contents
