Using The Whisk Attachment - BRAYER BR1248 Instruction Manual

10 EN
The amount of products and the processing time:
Product Maximum weight
Meat 250 g
Herbs 50 g
Almond 150 g
Cheese 100 g
Bread crumbs 80 g
Onions 200 g
Cookies 150 g
Soft fruit 200 g

USING THE WHISK ATTACHMENT

• Continuous operation time should not exceed 1
minute while using the whisk attachment (7). Make at
least a 3-minute break between operation cycles.
ATTENTION!
Do not use the whisk attachment (7) to knead tight
dough (pic.1).
• Use the whisk attachment (7) only for beating egg
whites, making biscuit dough or for mixing ready
desserts.
Before installing the whisk attachment (7), make
sure that the power plug is not inserted into the
mains socket.
Maximal time
• Insert the whisk attachment (7) into the whisk gear
10 seconds
(6).
10 seconds
• Insert the whisk gear (6) into the motor unit, make
sure that the gear (6) and the whisk (7) are fixed
10 seconds
properly (fig. 3).
10 seconds
• Insert the power plug into the mains socket.
• Immerse the whisk attachment (7) into a suitable
10 seconds
bowl with food. You can put the foodstuffs into the
10 seconds cup (11).
• To switch the unit on, press and hold down the button
10 seconds
(4) « ».
• When you press and hold the button (4) « » you can
10 seconds
control the attachment rotation speed
• by turning the control knob (5).
• For operation at the maximal rotation speed, press
and hold down the button (3) «T».
• Release the button (3 or 4) to switch off.
• After you finish using the unit, disconnect the power
plug from the mains socket, disconnect the whisk
gear (6) from the motor unit.
• Remove the whisk attachment (7) from the gear (6).
CLEANING
ATTENTION! The blades of the chopping knife (9) are
very sharp and may be dangerous. Handle the chopping
knife (9) very carefully!