Before The First Use - BRAYER BR1248 Instruction Manual

THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.

BEFORE THE FIRST USE

After the unit's transportation or storage at negative
temperature, unpack it and wait for at least 3 hours
before using it.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that the indicated specifications of the
power supply voltage of the unit correspond to the
specifications of your mains. When using the unit in
the mains with 60 Hz frequency, the unit does not
need any additional settings.
• Before using the unit wash the whisk attachment (7),
the bowl (10), the chopping knife (9) and the cup
(11) with warm water and a neutral detergent and
dry them.
• Wash only the lower part of the blender attachment
(1), clean the outer surface with a slightly damp cloth.
Never immerse the blender attachment (1) into water
or any other liquids completely.
• Wipe the motor unit, the chopper geared lid (8), the
whisk attachment gear (6) with a soft, slightly damp
cloth and then wipe them dry.
ATTENTION!
Do not immerse the blender attachment (1), the
motor unit, the chopper geared lid (8), the whisk
attachment gear (6), the power cord and the power
plug into water or any other liquids.
USING THE BLENDER ATTACHMENT
Continuous operation time should not exceed
30 seconds while using the blender attachment
(1). Make at least 3 minutes break between the
operation cycles.
• Use the blender attachment (1) for making sauces,
mayonnaise, fruit puree, baby food, mixing various
ingredients and for processing fruit and vegetables
containing enough liquid.
• Before installing the blender attachment (1), make
sure that the power plug is not inserted into the
mains socket.
• Insert the blender attachment (1) into the motor unit
until the release buttons (2) clicking, make sure that
the attachment is fixed properly (pic. 1).
• Insert the power plug into the mains socket.
EN 7