Chapter 8 Network Camera Adjustment; Adjustment With Got /Gt Softgot2000 - Mitsubishi Electric MELSEC iQ-R Series Introduction Manual

8
NETWORK CAMERA ADJUSTMENT
8.1

Adjustment with GOT /GT SoftGOT2000

By using the GOT linkage function, the live video of network camera and the PTZ control can be performed with the GOT/
SoftGOT connected to the CPU module in the same network as the network camera. The live video can be checked and the
PTZ control can be adjusted by using the GOT sample screen.
For details on the settings and sample screens used in this guide, refer to the following.
Mitsubishi Electric Programmable Controller Camera Recorder Module RD81RC96-CA Sample Screen Manual (BCN-
*1
P5999-1333)
*1 It can be downloaded from the Mitsubishi Electric Factory Automation Global Website.
www.mitsubishielectric.com/en
Operating procedure
1.
Start the GOT with the sample program written, or open the sample program on GT SoftGOT2000.
2.
Select the target camera recorder module.
8 NETWORK CAMERA ADJUSTMENT
8.1 Adjustment with GOT /GT SoftGOT2000
8
74