Mitsubishi Electric MELSEC iQ-R Series Introduction Manual page 33

14.
After setting the following items, click the [OK] button.
GOT Linkage Enable/Disable: Enable
Ex.
IP Address: 192.168.3.30
Login Name: Login name set in the FTP server setting
Password: Password set in the FTP server setting
• For the IP address, set the IP address of the connected GOT. When using GT SoftGOT, set the IP address
of the personal computer.
• Perform an FTP communication test to verify that the entered values are correct.
15.
Click the [OK] button to complete the settings of the camera recorder module.
4 PROGRAMMABLE CONTROLLER SETTINGS
4.2 Parameter Settings of Camera Recorder Module
4
32