Finding The Error Factor Device - Mitsubishi Electric MELSEC iQ-R Series Introduction Manual

7.3

Finding the Error Factor Device

The data flow analysis function automatically creates a data flowchart from the program of GX Works3 to visually display the
devices/labels to be the conditions for executing the basing point device/label to be analyzed or those affected by the
execution.
The following describes the procedure for starting the operation of the data flow analysis function.
Operating procedure
1.
Start GX Works3, and open the program.
2.
Select a device to be the basing point, and execute the data flow analysis.
Right-click  [Dataflow Analysis]
7 CHECKING RECORDED RECORDING FILES
71
7.3 Finding the Error Factor Device