Instal L Ation Check List - True TUI-15-R-SS-D Install Manual And User Manual

Table of Contents

To ensure no part of the installation process has been overlooked, complete the checklist below.

… Has an authorized True dealer or licensed installer inspected stainless steel surfaces

for imperfection?

(Cosmetic defects are covered by a limited 30-day warranty)

… Have all packaging materials been removed?

… Is the unit properly leveled with all leveling legs contacting the floor?

… Has the water filter been installed? Has the water supply been turned on?

… Have the water supply and drain connections been made?

… Is the water supply temperature always between 40-100˚F (4.4-7.8˚C)?

… Has the ice machine drain line been routed into an open drain with no more than 48"

(1,219.2 mm) vertical rise for 1/2" I.D. tubing and no more than 100' (30.48 m) run?

… Has the water supply been turned on?

… Is the power cord plugged into a properly grounded three-prong outlet in accordance with all

applicable electrical codes?

… Have all connections been checked for water leaks? If not, pour water directly into the ice

storage bin to ensure drain pump operation and inspect for leaks.

… Were the ice maker and storage bin disinfected prior to use? If not, see "Sanitizing" (page 50).

… Has the ice machine been turned on? During the initial fill, can you hear the water valve turn

on and see water filling the reservoir tank?

… After the first ice cycle, did all 24 ice cubes fall into the bin during harvest?

… Have the first two batches of ice been discarded?

… Has the customer reviewed the unit's operation in this manual?

… Has the customer reviewed the schedule of maintenance of the machine?

Page 6 of 64

T RUE RE S ID E N TI A L

I N S T A L L A T I O N C H E C K L I S T

12/07/2021

TEC_TM_155 REV. A

Table of Contents

Show Quick Links

Table of Contents