FIG. 1.
Slide the door off the hinge bolts through the keyhole slots.
Align along
this edge
FIG. 3.
Align along the bottom door bracket edge. Front of door assembly
shown.
FIG. 5.
Carefully fasten the overlay panel to the door front.
TEC_TM_155 REV. A
P R I O R T O I N S T A L L A T I O N
FIG. 2.
FIG. 4.
as shown.
12/07/2021
Remove the NSF cover screw caps.
The bottom edge of the panel should align with the bracket
15" T RUE I CE
M AC HINE IN STA L L GUID E
®
Screw cap
NSF Cover
Page 21 of 64