True TUI-15-R-SS-D Install Manual And User Manual page 39

BIN LIG HT
Press LIGHT to control the bin light.
• Press LIGHT repeatedly to cycle through the 14
preset designer light colors
LIGHT
• Press and hold
bin light on or off.
ADJUS T CUBE SIZE
The ice cube size is easily adjustable to meet your
usage.
The available cube sizes range from -6 (smallest) to
+6 (largest). The default is 0. Please see fig. 1.
To adjust the cube size, press
shows the desired setting.
ADJUS T ICE LE VEL
The ice bin level determines how much ice will be in
the storage bin before the ice level sensor considers
full (see fig. 1). The default setting is 100%. the level
adjusts in 5% increments.
To adjust the ice level, press
shows the desired setting.
TEC_TM_155 REV. A
C A B I N E T O P E R A T I O N
for 5 seconds to toggle the
SIZE until the display
LEVEL
until the display
AD JUS T FOR WATER QUALIT Y
The water quality setting allows your ice machine to
easily accommodate different levels of water quality /
hardness / scale. The available settings range from 0
(soft water / low scale) to 5 (hard water / high scale).
The default setting is 0. Please see fig. 1.
If you are unsure of your water quality, check your
water with a water quality test kit (not provided
by TRUE).
To adjust for water quality, press both
CLEAN.
0 1
Soft water/
low scale
FIG. 1. Water quality setting range.
15" T RUE I CE
12/07/2021
LIGHT
2 3 4
M AC HINE IN STA L L GUID E
®
and
5
Hard water/
high scale
Page 39 of 64