Uncr Ating - True TUI-15-R-SS-D Install Manual And User Manual

UNCR ATING

R EQUIR ED T O O L S
• Cutting Tool
• Hammer
• Crowbar
• Phillips Screwdriver
• Floor Protector
P R O CEDUR E
The following procedure is recommended for uncrating
the unit:
1. Remove the outer packaging (cardboard and clear
plastic). See fig. 1.
2. Inspect the unit for concealed damage.
file a claim with the freight carrier if there is
3. Cut the plastic band and remove the foam block.
See fig. 2.
NO T E: MO V E T HE UNI T A S CL O SE A S
P O S SIBL E T O I T S F IN A L L O C AT ION BEF O R E
R EMO V ING T HE SK ID.
4. Position the floor protector next to the skid.
5. Carefully lift the unit off the skid and place the unit
on the floor protector. See fig. 3.
6. Remove the interior packaging.
Page 28 of 64 T RUE RE S ID E N TI A L
I N S T A L L A T I O N
Immediately
damage.
12/07/2021
®
FIG. 1. Pull the staples from the skid.
FIG. 2. Remove the foam block after moving the unit as
close as possible to the final installation location.
FIG. 3. Carefully move the unit off the skid.
TEC_TM_155 REV. A