Before Oper Ating; Bre Ak Er Rese T; P Ower Sequence - True TUI-15-R-SS-D Install Manual And User Manual

BEFORE OPER ATING

To ensure ice quality, please clean and sanitize this
machine prior to first use. See "Descaling & Sanitizing"
(page 49). To ensure proper operation, follow the
installation checklist at the front of this manual.
NO T E: C O S T S A S SO CI AT ED W I T H
A D JU S T MEN T S, CL E A NING A ND S A NI T I Z ING
P R O CEDUR E S IN T HI S GUID E A R E NO T
C O V ER ED BY T HE WA R R A N T Y.
WA R NING: D O NO T U SE T HE ICE M A CHINE T O
S T O R E A N Y T HING O T HER T H A N ICE .
WA R NING: D O NO T OP ER AT E EQUIP MEN T T H AT
H A S BEEN MI SU SED, NEG L EC T ED, DA M A G ED,
A LT ER ED O R MO DIF IED IN A N Y WAY.
BRE AKER RE SE T
The breaker switch is located behind the kickplate
(see fig. 1). If the unit trips, press the breaker to reset
the switch.
FIG. 1. Breaker switch location.
Page 34 of 64 T RUE RE S ID E N TI A L
C A B I N E T O P E R A T I O N

P OWER SEQUENCE

• Press the power button
making operation. Press the button a second time
to turn the ice machine off.
• When unit is plugged in, the control board goes
through a sequence of checks to verify all sensors
are working properly.
• The drain system is energized when power is
supplied to the unit. It automatically turns on when
it senses water in the drain tube.
• Display will show
• If the unit powers the drain pump but the drain remains
clogged for five minutes, the display will show
cut power to the unit.
• If unit is too cold / too hot, or if the temperature probe is
unplugged / failed, the unit shuts down and displays an
error message.
12/07/2021
®
once to begin ice
oFF until the power button is pressed.
TEC_TM_155 REV. A
drn
and