Table of Contents
Advertisement
3
Touchscreen Display
8
The user can control the operation of the device with the control panel, for example:
•
Issuing, interrupting, continuing and canceling print jobs,
Setting printing parameters, e.g. heat level of the printhead, print speed, interface configuration, language and
•
time of day
Control stand-alone operation with a memory module
•
Update the firmware
•
•
Many functions and settings can also be controlled by software applications or by direct programming with a
computer using the printer's own commands. For details
Settings made on the touchscreen display make the basic settings of the device.
i
Note!
It is advantageous, whenever possible, to make adaptations to various print jobs in the software.
3.1
Start Screen
After switching on
Figure 4
Start screen
The touchscreen display is operated directly by touch:
•
To open a menu or select a menu item lightly touch the corresponding symbol.
To scroll in lists slide finger up or down on the display.
•
Open the menu
Interrupt the print job
Continue the print job
Starting a labelling cycle or a pre-defined step within a labelling cycle
Table 1
Symbols on the start screen
i
Note!
Inactive symbols are shaded.
Configuration Manual cab
printers,
Configuration Manual cab
During printing
Configuration Manual cab
printers.
Programming Manual cab
After print job
Repeat the last printed label
Cancel all print jobs
Feed a blank label
printers,
printers.
8
Advertisement
Table of Contents
