Loading Transfer Ribbon - CAB AXON 1 Original Instructions Manual

4 Loading Material
12
4.3

Loading Transfer Ribbon

1
2
3
4
5
6
Figure 10
1. Clean printhead before loading the transfer ribbon ( 7.3 on page 19).
2. Turn lever (1) counterclockwise to lift the printhead.
3. Slide transfer ribbon roll (3) onto the ribbon supply hub (4)
4. Hold ribbon supply hub (4) firmly and turn knob (2) counterclockwise until the transfer ribbon roll is secured.
5. Slide suitable transfer ribbon core (6) onto the transfer ribbon take-up hub (5) and secure it in the same way.
6. Guide transfer ribbon through the print unit as shown in Figure 11.
7. Secure starting end of transfer ribbon to the transfer ribbon core (6) with adhesive tape. Ensure counterclockwise
rotation direction of the transfer ribbon take-up hub here.
8. Turn transfer ribbon take-up hub (5) counterclockwise to smooth out the feed path of the transfer ribbon.
9. Turn lever (1) clockwise to lock the printhead.
Figure 11
Loading transfer ribbon
Transfer ribbon feed path
12