MSI J-TX98 R2 Manual page 21

Table of Contents

Advertisement

Select the "BIOS FEATURES SETUP" option in the CMOS SETUP UTILITY
menu allows user to change system related parameters in the displayed menu.
This menu shows all of the manufacturer's default values of this motherboard.
Again, user can move the cursor by pressing direction keys and <PgDn> of
<PgUp> keys to modify the parameters. Pressing [F1] key to display help
message of the selected item.
This setup program also provide 2 convinent ways to load the default parameter
data from BIOS [F6] or CMOS [F7] area if shown data is corrupted. This provides
the system a capability to recover from any possible error.
ROM PCI/ISA BIOS (2A5IIJ19)
Virus Warning
CPU Internal Cache
External Cache
Quick Power On Self Test : Disabled
Boot Sequence
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Boot Up System Speed
Gate A20 Option
Memory Parity Check
Typematic Rate Setting
Typematic Rate (Chars/Sec) : 6
Typematic Delay (Msec)
Security Option
PCI/VGA Palette Snoop
OS Select For DRAM > 64MB : Non-OS2
Note:
The Security Option contains "setup" and "system". The "setup" indicates
that the password setting is for CMOS only while the "system" indicates the
password setting is for both CMOS and system boot up procedure.
Virus Warning: This category flashes on the screen. During and after the
system boots up, any attempt to write to the boot sector or partition table of
the hard disk drive will halt the system and the following error message will
appear, in the mean time, you can run an anti-virus program to locate the
problem. Default value is Disabled.
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.
: Disabled
: Enabled
: Enabled
: A,C,SCSI
: Disabled
: Enabled
: On
: High
: Fast
: Enabled
: Disabled
: 250
: Setup
: Disabled
Figure 3-3
Video BIOS Shadow
C8000-CBFFF Shadow
CC000-CFFFF Shadow
D0000-D3FFF Shadow
D4000-D7FFF Shadow
D8000-DBFFF Shadow
DC000-DFFFF Shadow
Esc: Quit ↑↓→← : Select Item
F1 : Help
Pu/Pd/+/-:Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
20
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled

Advertisement

Table of Contents
loading

Table of Contents