Power Management Setup; The Description Of The Power Management - MSI J-TX98 R2 Manual


VGA Memory Clock (MHz) (55): Setting the VGA memory clock frequency
can choice 40 to 70 MHz. Default value is 55MHz, we recommend using
default value, because the higher memory clock frequency setting makes
system unstabled.

3-4 POWER MANAGEMENT SETUP

Choose the "POWER MANAGEMENT SETUP" in the CMOS SETUP UTILITY to
display the following screen. This menu allows user to modify the power
management parameters and IRQ signals. In general, these parameters should
not be changed unless it's absolutely necessary.
ROM PCI/ISA BIOS (2A5IIJ19)
Power Management : User Define
PM Control by APM : Yes
Video Off Option : Susp,Stby -> Off
Video Off Method : V/H SYNC+Blank
Switch Function : Break/Wake
Doze Speed (div by) : 2
Stdby Speed (div by): 3
Hot Key Suspend
** PM Timers **
HDD Off After : Disabled
Doze Mode : Disabled
Standby Mode : Disabled
Suspend Mode : Disabled
** PM Events **
COM Ports Activity : Enabled
LPT Ports Activity : Enabled
HDD Ports Activity : Enabled
Again, user can move the cursor by pressing direction keys to the field need to be
modified and press <PgDn> or <PgUp> to alter item selection. You can only
change the content of Doze Mode, Standby Mode, and Suspend Mode when the
Power Management is set to 'User Define'.

3-4-1 The Description of the Power Management

POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
: Enabled
VGA Activity
IRQ3 (COM 2)
IRQ4 (COM 1)
IRQ5 (LPT 2)
IRQ6 (Floppy Disk) : Enabled
IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir) : Enabled
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 (PS/2 Mouse) : Enabled
IRQ13 (Coprocessor) : Enabled
IRQ14 (Hard Disk) : Enabled
IRQ15 (Reserved)
Esc: Quit ↑↓→←: Select Item
F1 : Help Pu/Pd/+/-: Modify
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Figure 3-5
26
: Disabled
: Enabled
: Enabled
: Enabled
: Enabled
: Disabled
: Enabled
: Enabled
: Enabled
(Shift)F2 : Color