Table of Contents
Advertisement
AWARD BIOS SETUP
Award's ROM BIOS provides a built-in Setup program which allows user modify
the basic system configuration and hardware parameters. The modified data will
be stored in a battery-backed CMOS RAM so data will be retained even when the
power is turned off. In general, the information saved in the CMOS RAM stay
unchanged unless here is configuration change in the system, such as hard drive
replacement or new equipment is installed.
It is possible that CMOS had a battery failure which cause data lose in CMOS-RAM.
If so, re-enter system configuration parameters become necessary.
To enter Setup Program
Power on the computer and press <Del> key immediately will bring you into BIOS
CMOS SETUP UTILITY.
ROM PCI/ISA BIOS (2A5IIJ19)
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURATION
LOAD BIOS DEFAULTS
LOAD SETUP DEFAULTS
Esc : QUIT
F10 : Save & Exit Setup
The menu displays all the major selection items and allow user to select any one
of shown item. The selection is made by moving cursor (press any direction key)
to the item and press <Enter> key. An on_line help message is displayed at the
bottom of the screen as cursor is moving to various items which provides user
better understanding of each function. When a selection is made, the menu of
selected item will appear so the user can modify associated configuration
parameters.
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
INTEGRATED PERIPHERALS
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
↑↓→← : Select Item
(Shift) F2 : Change Color
Time, Date, Hard Disk Type...
Figure 3-1
18
Advertisement
Table of Contents
