Table of Contents
Advertisement
may also configure two hard disks to be both Masters using one ribbon cable
on the primary IDE connector and another ribbon cable on the secondary IDE
connector.
10. IDE activity LED: HDLED
This connector connects to the hard disk activity indicator light on the case.
11. Front Panel connector: This 16-pins connector to connect to case front
panel switch.
A. Turbo LED switch: TBLED
The motherboard's turbo function is always on. The turbo LED will remain
constantly lit while the system power is on. You may also to connect the
Power LED from the system case to this lead. See the figure below.
B. Reset switch lead: RST
This 2-pin connector connects to the case-mounted reset switch for
rebooting your computer without having to turn off your power switch. This
is a preferred method of rebooting in order to prolong the life of the
system's power supply. See the figure below.
C. Keyboard lock switch lead & Power LED: KEYLOCK & PW
This 5-pin connector connects to the case-mounted key switch for locking
the keyboard for security purposes and Power LED together.
D. Speaker connector: SPEAKER
This 4-pin connector connects to the case-mounted speaker. See the figure
below.
Secondary IDE Connector
HDLED
1
3
-
+
IDE (Hard Drive) LED
15
Pin 1
Advertisement
Table of Contents
