Telnet Serial Command Api; Requirements; Usage Notes; Getting More Information - VADDIO IntelliSHOT 999-21100-000 Complete Manual

Telnet Serial Command API

The Vaddio Telnet command API allows an external device such as an AMX or Crestron presentation
system to control the camera. It is also used for writing macros.

Requirements

Telnet must be enabled on the Security page of the device's web interface.
n
Your computer must have a Telnet client. Telnet port 23 is used.
n
Your computer must be able to connect to the device over the network.
n
When you connect via Telnet, you must log in using the admin account.
n

Usage Notes

The > character is the command prompt.
n
In addition to the camera control commands, Telnet session management commands are available –
n
help, history, and exit.
CTRL-5 clears the current serial buffer on the device.
n

Getting More Information

Use a question mark as a command or command parameter to display a list of available commands,
subcommands, or command parameters. For example, ? returns all top-level commands; network ?
returns the valid subcommands for the network command; and network ping ? returns the
parameters available for the network ping command.
To discover the valid range of values for a command, use a value that you expect to be out of range. For
example, camera zoom set 64 returns an error message stating the valid range of zoom values.
Firmware updates sometimes implement new commands or command parameters. We do not update
the manuals for every firmware update, and occasionally the author makes a mistake. Querying returns
the command parameters that are currently available, along with guidance on command syntax.

Typographical Conventions

{ x | y | z } – Choose x, y, or z.
n
<variable> – Substitute the desired value here.
n
< x - y > – Valid range of values is x through y.
n
[parameter] – Parameter is optional.
n
Complete Manual for the IntelliSHOT Auto-Tracking Camera
41