Telnet Serial Command Api - VADDIO RoboSHOT USB Series Complete Manual

Complete Manual for RoboSHOT USB Enterprise-Class PTZ Conferencing Cameras

Telnet Serial Command API

The Vaddio Telnet command API allows an external device such as an AMX or Crestron presentation
system to control the camera. Network connectivity and a Telnet client are required; Telnet port 23 is used.
In addition to the camera control commands, Telnet session management commands are available – help,
history, and exit.
Note
When you connect via Telnet, you must log in using the admin
account.
Things to know about Telnet:
The > character is the command prompt.
n
Using a question mark as a command parameter will bring up a list
n
of available subcommands or parameters. Example:
camera focus ?
camera focus
near Focus the camera near
far Focus the camera far
stop Stop the camera focus
mode Camera focus mode
CTRL-5 clears the current serial buffer on the device.
n
Typographical conventions:
n { x | y | z} – Choose x, y, or z.
n
n <variable> – Substitute the desired value here.
n
n < x - y > – Valid range of values is from x through y.
n
n [optional] – Parameter is not required.
n
56