Advertisement
Quick Links
Using the IntelliSHOT Auto-Tracking Camera
Customize this document to create a guide that's specific to your IntelliSHOT installation.
Front of the Camera
The camera is available in black or white.
Camera and zoom lens – Up to 30x zoom.
Integrated microphone – No external microphone needed in typical installations. Echo-canceling microphone
picks up the voices of participants up to 10 ft. (3 m) away.
Status lights – The illuminated trim detail on the camera's face indicates the camera's current state. The status
lights can be turned off in the administrative web interface.
Pivoting head – Manually tilt the head as needed.
Note
By default, the camera's status lights are active during normal operation; however, they can be
configured to remain off when the camera is powered up. The camera may be sending video even if the
lights are off.
Document 411-0053-40 Rev A, May 2021
Advertisement
Related Manuals for VADDIO IntelliSHOT
Summary of Contents for VADDIO IntelliSHOT
- Page 1 Using the IntelliSHOT Auto-Tracking Camera Customize this document to create a guide that's specific to your IntelliSHOT installation. Front of the Camera The camera is available in black or white. Camera and zoom lens – Up to 30x zoom. Integrated microphone – No external microphone needed in typical installations. Echo-canceling microphone picks up the voices of participants up to 10 ft.
-
Page 2: Operating The Camera From The Web Interface
Autoframing. Operating the Camera from the Web Interface The web interface is available on the Vaddio Device Controller touch panel (if your installation uses one) or from a computer’s web browser. The operator's Camera page provides most of the same controls as the remote:... -
Page 3: Zooming In Or Out
Muting Audio and Video Use the audio mute button to stop sending audio. Use the video mute button to temporarily stop sending video from the camera without placing it in standby. Use the RF remote to control volume. Managing the Camera Ready State Use the Standby button to switch between low-power (standby) and ready states. -
Page 4: Installing The Batteries
Before you can use the remote, you will need to: Install the batteries Pair the remote with the camera IntelliSHOT cameras are not compatible with IR remotes. Installing the Batteries The remote uses two AAA batteries. 1. Remove the cover from the back of the remote. You may need to press down on the inner edge while sliding it off. - Page 5 RF Remote Quick Reference Indicator and Power button – Set the camera to standby mode, or return to full-power mode. Function buttons – Reserved for future use. Arrow buttons – Pan and tilt. Autoframing pauses if you use these buttons. Home button –...
- Page 6 For other uses, please contact Legrand AV Inc. at av.vaddio.publications@legrand.com. Vaddio is a registered trademark of Legrand AV Inc. All other brand names or marks are used for identification purposes and are trademarks of their respective owners. All patents are protected under existing designations.