Help; Link Timeout; Probe Interval; Receive Timeout - 3Com 3C990B-TX-M User Manual

6 Installing NetWare Drivers
70

help

This command displays the syntax for the 3Com Advanced Server server features
commands.
Syntax
lbrsl help

link timeout

When a group is being created, the software waits the number of seconds specified by
this command for the link/topology check to finish and then displays timeout
information.
Syntax lbrsl link timeout seconds
where:
seconds is the time in seconds.
Example
lbrsl link timeout 10
Default 5

probe interval

This command sets the probe packet interval. If no argument is specified or the specified
argument is invalid, the current value is displayed. Otherwise, the new value is displayed.
Syntax lbrsl probe interval seconds
where seconds is the interval in seconds.
Example
lbrsl set probe interval 1
Default 1 second
If the delay is longer than 1 second, NIC or link
failures are not recognized as quickly.

receive timeout

This command sets the receive timeout individually for each group and displays a message
for each loaded frame type.
Syntax lbrsl receive timeout pri_slot seconds
where:
pri_slot is the PCI slot number of the primary NIC.
seconds is the time in seconds
Example
lbrsl receive timeout 10001 1
Default 1 second